An Air conditioner contains a liquid that evaporates a lot like alcohol but evaporates at a much lower temperature. As the liquid changes to gas and evaporates, it extracts heat from the air around it. The heat in the air is needed to separate the molecules for the fluid from a liquid to a gas. The liquid evaporates inside the house. The evaporator has metal fins to help in the exchange the thermal energy with the surrounding air. It evaporates inside a set of metal coils and the liquid makes the coils extremely cold. A fan blows across the coils and that air is what cools your house down. It then returns to the compressor to begin its trip all over again.

In contrast, a wall air conditioner sleeve is designed for a hole through the wall. https://suadieuhoabachkhoa.net/trung-tam-lap-dat-dieu-hoa-tai-ha-noi-uy-tin-co-mat-ngay/ vary substantially in thickness. A wall with simple sheet type siding may be only 6 inches thick, whereas a brick or stone wall can be much thicker. So wall air conditioner sleeves have ventilation louvers only in the back, to avoid louvers being covered by the wall edges. This limits the amount of ventilation space available, in turn limiting how powerful the unit can be. Wall air conditioners generally don't get much over 14,000 BTU, depending on the brand.

air-conditioner A good tip is to set your air conditioner unit on high when you turn it on. Air conditioners perform best when they recirculate the air in the room. Keep in mind that the faster the air is cooled, the quicker your unit's power consumption will drop. So once the room temperature has reached the level you want, you can then set the unit to low.





Installation Cost -When you consider installing a split AC in your house, make it a point to include the cost of installation as well. Installing a mini AC or split air conditioner is considered more complex than installing a window AC. As https://suadieuhoabachkhoa.net/ , you will need the help of a professional who is familiar with the installation process of the split AC.

Look for icing on pipe. Look at the larger of the two copper pipes going into the indoor coil. If you see any ice, then you have a problem. It is normal to have cold water condensed on the pipe, if it gets too cold the water will freeze. This temperature is too low for the air conditioner. Either the air flow is blocked, very dirty filter or worse. Or the unit is low on refrigerant; the likely culprit. It is possible both problems could exist. This icing will not usually cause immediate damage, but if not fixed it can lead to premature failure of your compressor. This is a cost of several thousand dollars for total unit replacement. You cannot fix this yourself; call your air conditioning service company. The cost of a service call to add refrigerant is much lower than replacing the air conditioner.

If your air conditioner stops working and you suspect that it is not getting power, there could be a problem with the power cord. Power cords may become worn and fail to supply electricity to the air conditioner. To check the cord, remove the control panel. Unscrew the cord terminals and then attach a test wire across the bare lead wires.

If you cannot clear the blockage yourself, or if it is buried inside the wall, you will need to phone a professional HVAC service company and book a service call.

Depending on the size of the room you want to chill you can buy a portable air conditioner. You do not have to spend a lot of money but chose wisely. In the case that you buy to cheep and weak air conditioner for your room you will not get anything because it will not be able to do the job for which it is designed. Take a look at the vendor sites and sites of large companies; find the models that you can afford and that can chill your room.